Fencing

Heavy duty galvanised clamp for securing cable to earth stakes.

• Heavy duty galvanised clamp for securing cable to earth stakes
• Galvanised for long life and good conductivity
• Will fit galvanised angle and galvanised pipe earth stakes.

Suitable for under gate cabling, softer outer layer for easier stripping, also suitable for initial lead out lengths (Energizer to start of fence system) of less than 0.5km.

• Easy to handle 2.5mm/12.5 guage galvanised wire
• Suitable between earth pegs in earth system
• Resistance: 35 Ohms per kilometre/56 Ohms per mile

Ensures good electrical connections for up to four wires.

• Ensures excellent electrical connections for good conductivity and effective animal control
• Heavily galvanised for durability and long life
• Suitable on all size wires up to 4mm (3/16") (8 gauge)
• Ensures effective electrical joints in the system

For speedy disconnection of bottom wires when vegetation challenge is greatest or to allow stock to graze under fence.

• For speedy disconnection of bottom wires when vegetation is touching the fence or to allow stock to graze under the fence
• Gives contact with wire at multiple points Note: Not suitable for main line connections. Use Joint Clamps for permanent electrical connections

The easy way to tension plain or barbed wire.

• Refined over decades, suitable for use with both plain and barbed wire 1.6 to 5mm in diameter
• Deliver a superior grip while minimising damage to tensioned wire
• Fast and easy one handed leverage with up to 25% less effort required to operate
• Strainer swivels for easy left and right hand operation
  
• Galvanised components, bright painted finish and user replaceable pins ensure long service life

Made for high quality galvanised spring steel for extra strength and flexibility.

• Uses G67403 Porcelain Reel
• Place close to a post
• Fire resistant and designed for high fire risk areas
• Wire secured behind porcelain reel with a Wire 'C' Clip

Reduce fence damage - unique live tip discourages stock from rubbing. Double end design allows for wires to be offset on both sides of the fence.

• Reduce fence damage - unique live tip discourages stock from rubbing
• Double end design allows for wires to be offset on both sides of the fence
• Strong UV treated plastic gives long life and strength especially when used on rolling ground
• Reduce animal injury with no protruding parts
• High grade galvanised spring steel for strength and rust resistance
• Quality insulator ensures no power leakage to post
• Unique patented lockset design ensures a solid attachment to steel posts

Reduce fence damage: live tip discourages stock from rubbing.

Robust 'lockset' design: ensures solid attachment to post.

Offsets are used in offset or retrofit electric fencing - an economical and easy to install option if you have an existing or new conventional, non-electric fence that you want to protect.

• Reduce fence damage - unique live tip discourages stock from rubbing
• Strong UV treated plastic gives long life and strength especially when used on rolling ground
• Reduce animal injury with no protruding parts
• High grade galvanised spring steel for strength and rust resistance
• Quality insulator ensures no power leakage to post
• Unique patented lockset design ensures a solid attachment to steel posts.

The strongest, long term end strain insulation for high tensile permanent electric fencing

- Designed for superior handling and strength

- Ideal for long strains of permanent fence

- Made from hard wearing, long life UV resistant material

Maintain tension on fence wires, prevent strain on posts, add strength and keep an electric fence looking good.

Designed for high powered fencing systems and areas where insulation is critical.

The insulator creates secure and tidy end assembly. Large, seperate tie off ends enable superior insulation and tidy end assembly.

For all wire types up to 8mm/0GA wide.

• deal for tightening existing fences or trellising wires and can also be used to join wires
• Strong, lightweight, rust-resistant construction
• Easy install - no need to cut wire before straining

Simplest option for end strain insulation. Use at one end on shorter fence lengths and add an Insulated Wire Stainer Kit (G61803) on the other end. No special tools required - simply slide over the post and its done. 

• Fits up to 8 inches/200mm post
• High strain insulator made from UV resistant, high strength polycarbonate plastic
• Rust-resistant, galvanised stainless steel rope and copper crimps for strength, durability and flexibility
• No wire tying required - pre-formed loop and knot
• Large loop allows strainer to pass through

Ratchet style wire strainer. Can also be used in-line by threading through strainer.

Versatile use – traditionally for end of line straining or for in-line straining by threading wire through strainer instead of tying an extra knot.

• Can be used for end of line and in line straining
• Robust, high quality spring loaded locking clip with long life galvanised steel frame
• 12 tooth spool for fine adjustment and easy tightening action. Tighten with Gallagher Strainer Handle (G69530) frame.
• Increased coining and spine height improves the strength of the strainer, reducing the risk of the frame splaying.
• Increased spool radius reduces the risk of wires breaking. This extra strength accomodates up to 4mm 8 gauge fence wire.

All in one solution for fast, simple and tidy end assembly. Includes all three end strain elements - insulator, strainer and steel rope. No special tools required - simply slide over the post and you’re done. Fits up to 8 inches/200mm post.

• Increased spool hub thickness provides extra strength to accommodate using up to 4mm gauge fence wire
• Two extra teeth on spool provide easier wire tightening action and control, requiring less clip turning to hook into next tooth
• Uses G79504 insulated wire strainers - strong galvansied steel frame holding a tapered die cast aluminium spool design for ease of starting and wire alignment
• High quality spring loaded locking clip
• High Strain Insulator nestled in the body of the strainer - made from UV resistant, high strength polycarbonate plastic
• Rust-resistant, galvanised stainless steel rope and copper crimps for strength and durability
• No wire tying required - pre-formed loop and knot

All-in-one, end of line fence assembly

We've taken what we love about our favourite strainers and created an all-in-one insulated end strainer.

The result is an end strainer that insulates, strains and connects - for end of line electric fence assembly.

The end strainer's insulated body provides 1.7x the insulation of previous models.

Unlike most other end strainers, this end strainer also conveniently comes complete with a joint clamp that allows direct attachment of wires for paralleling and power connection.

Fire resistant, ideal for high fire risk areas. Suitable for long strains of permanent fence.

• Long life
• Fire resistant, ideal for high fire risk areas
• Ensure strain is from centre of insulator when tying
• Suitable for long strains of permanent fence
• Long tracking distance minimises power leakage
• High quality white glaze finish

Fire resistant with a long life, high quality white glaze finish.

• Fire-resistant Insulator
• 1 1/2" diameter
• High-quality, white-glaze finish
• Use for change of direction in permanent fences

Fitted to a power drill, this drill bit quickly installs Screw in Ring Insulators.

• Fitted to a power drill, this drill bit quickly installs screw in insulators and screw in ring offsets
• Can be used on all screw in ring insulators

A robust ring insulator for fitting plastic wire/cord to wooden posts.

Cleverly designed to guarantee no shorts and features a handy orange wear indicator to show when the insulator should be replaced.

This insulator is easy to secure to posts with its extra sharp point. Simply screw insulator directly into wooden post by hand or with a power drill using the Screw In Insulator Drill Bit (sold separately).

• Screw insulator directly into wooden post utilizing a 4-5mm pilot hole or use the Screw In Insulator Drill Bit (G71300) to attach to the post
• Made from strong high density, long lasting UV resistant plastic
• Angled slot allows quick, secure wire hold

For Equine Fence Wire fences that need to be temporarily lowered for vehicle or animal access such as on laneways, beside drains or silage pits.

• Use with Equine Fence Wire
• Ideal for fences that need to be temporarily lowered for vehicle or animal access such as on laneways, beside drains or silage pits
• Superior insulation with large heavy duty sheild to prevent pulse arcing and reduce power leakage
• Easy set up - no tools needed to install or remove wire from insulator
• Made from strong high density, long lasting UV resistant plastic

For wood post electric fences that need to be temporarily lowered for vehicle or stock access such as on laneways, beside drains and around silage pits.

• Heavy duty jaw design to withstand fence tension and keep wires firmly in place
• Superior insulation with large heavy duty shield to prevent pulse arcing and reduce power leakage
• Made from strong high density, long lasting UV resistant plastic.

For wood post electric fences that need to be temporarily lowered for vehicle or stock access such as on laneways, beside drains and around silage pits.

• Heavy duty jaw design to withstand fence tension and keep wires firmly in place
• Superior insulation with large heavy duty shield to prevent pulse arcing and reduce power leakage
• Made from strong high density, long lasting UV resistant plastic.

Designed specifically for 40mm (1½") equine electric tape fencing.

• Designed specifically for 40mm (1½") equine electric tape fencing
• Soft rubber jaws lock tape in place and prevent wear
• Made from long lasting, UV resistant plastic
• Easy to insert and release tape
• Staples on to wooden posts.

Unique snap on design. Specially designed for 12.5 - 40mm tape.

• Specially designed for 12.5 - 40mm tape
• Unique snap on design
• Simple to install with no tools
• Made from high density, UV resistant polyethylene plastic

Designed for steel posts, the best choice for permanent electric fencing using Y posts or Waratahs.

• Easy to use - no tools required. Pinlock allows for easy wire installation and removal under tension
• Long life - Made from UV resistant polyethylene plastic
• Universal post attachment - For use with all steel posts, including Waratah - JIO posts
• Superior insulation - Heavy duty double shield provides 150% more insulation performance over previous model
• Extra strength - Heavy duty, designed for high tensile fences with a 10 year warranty
• Wide jaw - Able to accommodate wire sizes up to 8mm/0 GA

Designed for steel posts, the best choice for permanent electric fencing using Y posts or Waratahs.

• Easy to use - no tools required. Pinlock allows for easy wire installation and removal under tension
• Long life - Made from UV resistant polyethylene plastic
• Universal post attachment - For use with all steel posts, including Waratah - JIO posts
• Superior insulation - Heavy duty double shield provides 150% more insulation performance over previous model
• Extra strength - Heavy duty, designed for high tensile fences with a 10 year warranty
• Wide jaw - Able to accommodate wire sizes up to 8mm/0 GA

Designed for steel posts, the best choice for permanent equine electric fencing using Y posts or Waratahs.

• For use with steel posts - Waratahs and Y posts
• Use with Equine Fence Wire
• Ideal for fences that need to be temporarily lowered for vehicle or animal access such as on laneways, beside drains or silage pits
• Strong jaw design to withstand fence tension and keep wires firmly in place
• Superior insulation with large heavy duty shield to prevent pulse arcing and reduce power leakage
• Easy set up - no tools needed to install or remove wire from insulator
• Made from strong high density, long lasting UV resistant plastic.

Twin pin system locks the insulator firmly in place with 50% stronger post attachment than standard pinlocks.

• Strong post attachment. Twin pin system locks the insulator firmly in place with 50% stronger post attachment than standard pinlocks
• Strong wire retention. The increased diameter front pin withstands significantly higher wire pressure from stock impact compared to standard pinlocks
• Quick and easy to install. Twin pin matches with the existing JIO™ Post holes for super-fast install requiring no tools
• Easy wire removal. Pinlock wire retention allows for easy installation/removal of wire under tension
• UV resistant. Made from UV resistant High Density Polyethylene (HDPE) plastic.

Safe and flexible - add a single electric wire/tape/braid to the top of existing steel posts using this protective cap.

• Designed to fit over the top of a steel Y or T post and securely attach electric wire, tape of braid
• Made from UV resistant plastic for long life and strength
• Flexible wire attachment options - strong front latch to firmly grip 40mm or 12.5mm tape
• Front latch and insulator top can also take 8mm Equine Fence wire and braid
• Superior insulation as large plastic body protects against arcing

Specifically designed for cutting, stripping, and bending electric fence wire with minimum wire damage.

• 8" pliers for cutting, stripping and bending high-tensile wire
• Ensures minimum wire damage
• Comfort grip, plastic-covered handle.

Saddles have been stringently tested and zinc coated for enhanced durability.

A very tight thread ensures this gudgeon fits securely with very little movement in the post.

• A very tight thread ensures this gudgeon is secure and reduces the tendency for movement in the post
• Zinc electroplating of the thread and pin ensures finer tolerances
• Long pin is pad lockable, important for boundary gates.
  

Plates have been stringently tested and zinc coated for enhanced durability.