Sort by:
Our twist-tight post and stay connectors allow you to securely connect a wide range of post and stay sizes with our unique design.
Rather than flat, the Twist-Tight™ tongue is twisted. This twist covers the whole inside of the stay, resulting in a stronger and more secure hold.
The tongue is tapered at one end, so it is easy to install. It then widens at the base and locks in. We have also added a disk at the base to stop water and spiders from getting into your stay.
The tongue itself can be used in wooden posts or connected to a steel post using our clamps.
Key Features:
- No Drilling
- No Welding
- Adjustable
- Easy Install
- Fast Install
- Strong
- Anti-Bruise
Need a strong gate latch for your stock yard? Our galvanised screw-in oval ring latches are easy to use and secure.
Key Features:
- Stock Proof
- Heavy Duty
- Rust Resistant
Are you frustrated with looping your chain around your fence post in order to secure your gate? If you have a barb wire fence, I’m sure you have experienced getting snagged at least once when trying to close your gate.
Our hot-dip galvanised chain latch kit allows you to simply latch your gate onto any wooden or steel post. This allows you to loop your chain around your gate, rather than the fence post.
Heavy Duty Deep Drilling Screws
Our chain latch kit uses special deep-drilling metal tek screws, designed especially for screwing into thicker steel. These screws are rated for steel up to 8mm thick and will easily drill through heavy wall steel posts. The last thing you want when installing your gate latch is to have to worry about broken screws or screws that pull out easily! You won’t have that problem with this chain latch kit!
Install with only one hole to drill! An improved version of a brooker hinge. Strong, reliable & long-lasting. Hang your gate quickly and easily.
Key Features:
- Bolt-Through
- Timber Posts
- Fast Install – Half The Drilling
- Galvanised
- ACME Thread – No Binding & Clogging
- Increased Adjustment – Both Directions
Are you looking for a simple screw-on gate kit? Our nylon gudgeon kit can be easily fitted with a 10mm auger.
The kit is made from hot-dip galvanised steel. This ensures a strong and long-lasting quality gate hinge set.
Key Features:
- Light Duty
- Screw on
- Hot Dip Galvanised
- Fast Install
- Easy Install
The Bolt-On Oval Ring Latch is one of the most user-friendly latches out there. It’s designed with a smooth, easy-to-grasp knob that’s perfect for opening and closing – even on the bike. And with its stock-proof design, you can be sure that your animals won’t be able to lick their way through.
One of the best things about this latch is that its chain length is adjustable. Whether your posts are moving or you need a little extra length, you can simply place the bolt through different chain links to adjust it.
Key Features:
- Easy To Use
- Anti bruise
- Adjustable
- Stock-Proof
Looking for a durable gate kit? Our top saddle backing plate is a unique design that combines a backing plate with a saddle attachment. This combination results in an extreme strong top hinge set.It can be screwed on, or welded on, allowing you to easily fasten the top of your gate and swing it smoothly.Each piece is hot dipped galvanised to fight against corrosion. Paired with one of our bottom gudgeons and your choice of latch, it will give you an extremely strong and long lasting product.
Key Features:
- Steel Post
- Versatile – Weld or Screw on
- Not Adjustable
- Galvanised
Need a strong solution to secure two gates closed, or an easy-top-open bow for a single gate? Our upgraded galvanised gate bow can easily be installed onto a gate or post. Securing your gates is as simple as lifting up the bow and dropping it over the gate.
Key Features:
- Fast Install
- Easy to Use
- Strong
- Corrosion Resistant
- Suitable For Timber Or Steel Posts
- Nylock Nut
- Versatile
All of our gate kits are made from hot dipped galvanised steel to ensure strong and long lasting kit. With a 16mm thread, it can be easily installed with a 20mm Auger. 275mm – perfect for pine posts.
Key Features:
- Strong
- Long Lasting
- Adjustable
If you are looking for a more secure and stock proof alternative to your standard hook latches, then our spring hook latches are an excellent solution.
Our spring latches are slightly different from our competitors. On each latch we there is an indent in the stainless steel circle ring that has been custom designed to resist sideways movement. This ensures a secure and longer lasting latch.
Key Features:
- Stock Proof
- Long Lasting
- Quick & Easy to Use
Are you looking for a simple, yet strong and reliable hinge? Our weld-on hinges are perfect for any steel gate.
Key Features:
- Strong
- Galvanised
- Fast Install
- Easy Install
- Weld On
Make installing post and rail fencing a breeze on steel or timber posts with our RailTight End Brackets. Sold as a pair.
Key Features:
Horse Safe: The smooth, sleek design provides a safe, clean, anti-bruise join.
DIY: Easy and convenient DIY installation. No welding or grinding.
Professional and Top Quality: Very neat, fully enclosed design, giving a high-quality finish.
Our two way latches are made from zinc plated steel. These lightweight latches allow you to swing a gate closed from either side. When the gate hits the bevelled lug, it pushes the lug up allowing the gate to slide in. Once the gate is in, the lug will drop back down, holding the gate in place.
We don’t recommend them for stockyards, however, they are excellent if you need a secure latch for personal access and residential gates.
Key Features:
-
Easy to Install
- Weld On
- Screw On
- Corrosion Resistant
The strongest adjustable bolt-on hinge set on the market. Built for round steel posts, installed with one tool, and designed so your gate never drags in the dirt again. Patent-protected Australian design.
The FG6 can be installed in minutes with no welding, no drilling, and no power tools. All you need is a 19mm socket or spanner. That makes it the only hinge set you can fit during total fire bans, in remote locations, or anywhere a welder isn’t practical.
If security is a concern, this is the hinge set for you. Once this hinge is welded onto the post, the gate isn’t going anywhere. For a very affordable price, you get a simple, versatile, and robust hinge set. Peace of mind doesn’t need to come at a premium.
Our zinc plated gate kit allows you to install and lock up your gate using a minimal amount of pieces. The gate kit includes:
- A weld on steel pin.
- A weld on saddle.
Key Features:
- Steel Post
- Weld On
- Not Adjustable
- Versatile – Suits All Post Shapes
- Zinc Plated
Our post caps stop water and spiders from getting into your posts. Just put them on top of your post and hammer them on with a rubber mallet. It’s that simple.
Each galvabond round post cap is made from quality steel to ensure a long lasting and strong cap.
Each cap has little ridges on the inside, which means once the cap is on, it wont come off.
- Smooth Finish
- Corrosion Resistant
- Secure Fit
Saddles have been stringently tested and zinc coated for enhanced durability.
A very tight thread ensures this gudgeon fits securely with very little movement in the post.
- A very tight thread ensures this gudgeon is secure and reduces the tendency for movement in the post
- Zinc electroplating of the thread and pin ensures finer tolerances
- Long pin is pad lockable, important for boundary gates.
Plates have been stringently tested and zinc coated for enhanced durability.
Suitable for both wooden and steel gates.
- The durability and ease of use of the LP (lick proof spring ring) makes this a very popular gate fastener
- Lick proof spring ring prevents stock and gate movement from releasing the fastener
Premium gate pack with reliable nickel plate coating for superior durability.
Dimensions - 16/25mm for a 400mm post.
Premium gate pack with reliable nickel plate coating for superior durability.
Dimensions - 16/25mm for a 250mm post.
- Premium gate pack with reliable nickel plate coating for superior durability
- Lock through gudgeon for support at the top and a screw through gudgeon with plastic cone inlay for strength and enhanced swinging ability at the base
- Eliminates the frustration of having to carry or drag gates
- Dimension A: 275mm/ 11"
- Dimension B: 16mm/ 0.6"
Designed specifically as an economy range suited for lighter gates with lower stock pressure.
- Fully plated with a saddle fitting, screw through gudgeon and a JP gate fastener
- Built with the same premium finish as the field gate but economically designed for the lighter gate style