Fencing

Heavy duty galvanised clamp for securing cable to earth stakes.

• Heavy duty galvanised clamp for securing cable to earth stakes
• Galvanised for long life and good conductivity
• Will fit galvanised angle and galvanised pipe earth stakes.

Suitable for under gate cabling, softer outer layer for easier stripping, also suitable for initial lead out lengths (Energizer to start of fence system) of less than 0.5km.

• Easy to handle 2.5mm/12.5 guage galvanised wire
• Suitable between earth pegs in earth system
• Resistance: 35 Ohms per kilometre/56 Ohms per mile

• Join and tension in one
• The ceramic locking mechanism delivers a strong grip, taking higher loads and providing superior corrosion resistance – recommended to prolong the life of your Longlife^® Blue colour^® wire.
• Includes integrated adjustable torque setting on the handle. Once the pre-set wire tension is reached, the tool disengages to prevent overstraining and potential wire damage.
• Stainless steel springs provide excellent corrosion resistance.
• Long lasting and can be re-used.
• Save time and effort when joining wires, tensioning or terminating wire at a strainer post.
• Simply push wires through the wire joiner in each direction, and the one-way grip firmly holds each wire.  No more bending, twisting and tying wires.
• To tension both wires, use the Gripple Plus tensioning tool or Gripple contractor tensioning tool.

• Join and tension in one
• The ceramic locking mechanism delivers a strong grip, taking higher loads and providing superior corrosion resistance – recommended to prolong the life of your Longlife^® Blue colour^® wire.
• Includes integrated adjustable torque setting on the handle. Once the pre-set wire tension is reached, the tool disengages to prevent overstraining and potential wire damage.
• Stainless steel springs provide excellent corrosion resistance.
• Long lasting and can be re-used.
• Save time and effort when joining wires, tensioning or terminating wire at a strainer post.
• Simply push wires through the wire joiner in each direction, and the one-way grip firmly holds each wire.  No more bending, twisting and tying wires.
• To tension both wires, use the Gripple Plus tensioning tool or Gripple contractor tensioning tool.

Easily and securely tie-off wire around a strainer post

• Gripple T-Clip's twist on installation provides a secure termination of wire around a strainer post, with no need to staple or knot wires.
• The simple mechanism allows securing fence wire to strainer posts up to 5 times faster than manual tie-off methods.
• The Gripple T-Clip reinforcing hooks deliver strength where it's needed.
• Consistent replication when securing wire to strainer posts, as opposed to manually tying wire.
• Stainless steel spring provides greater strength and corrosion protection.
• The ceramic roller technology delivers better wire grip over higher loads.
• Recommended for use on round posts.
  

• Grips wire securely to efficiently tension plain and barbed fence wire
• Can be firmly attached around the strainer post with the 1.8m chain provided or 4.5m chains can be purchased separately for longer strains
• Used with the Wedgelock^® clamp to strain prefabricated fencing

Standard unit: 1.80m chain with optional 4.50m chain available

• An upgraded version of the Wizard wire strainer, designed and tested for use by fencing professionals, has a number of features that make it both easier to use and more suited to bigger fencing jobs.
• Longer 4.5 metre chain for larger diameter posts and longer fence strains.
• Longer handle for easier operation and more leverage (30% less effort).
• Quick change clamp for use with Wedgelock^® clamp.

Contractor unit: 4.50m chain with longer handle 

Need an auger for your wooden fence posts? Our hard wood augers make installing your latches a breeze.

Rotech Hardwood Augers are made of high-grade chromium alloy steel which has a pressure strength of 4000-5000 MPa while standard hardwood augers are made of a high carbon steel which generally has a pressure strength of 400-500 MPa.

Key Features:

Our twist-tight post and stay connectors allow you to securely connect a wide range of post and stay sizes with our unique design.

Rather than flat, the Twist-Tight™ tongue is twisted. This twist covers the whole inside of the stay, resulting in a stronger and more secure hold. 

The tongue is tapered at one end, so it is easy to install. It then widens at the base and locks in. We have also added a disk at the base to stop water and spiders from getting into your stay.

The tongue itself can be used in wooden posts or connected to a steel post using our clamps. 

Key Features:

Need a strong gate latch for your stock yard? Our galvanised screw-in oval ring latches are easy to use and secure.

Key Features:

• Stock Proof
• Heavy Duty
• Rust Resistant

NOTE: This kit assumes you already have a strainer post. Each stay kit includes a post cap.

If you are looking for an easy and quick to install corner assembly kit, then our kits are perfect for you. Once your strainer post is in, all it takes is five minutes each side, and your corner assembly is done. If you use it with one of our Drive-Tight strainer post kits, you can have the whole corner assembly installed within fifteen to twenty minutes! This can save you hours of work.

Our kits are all made from steel and are either hot-dipped galvanised, galvabond or stainless steel. This means they are termite-proof, fireproof and long-lasting. These kits are a perfect addition to any of our full end assembly kits.

Key Features:

Are you frustrated with looping your chain around your fence post in order to secure your gate? If you have a barb wire fence, I’m sure you have experienced getting snagged at least once when trying to close your gate.

Our hot-dip galvanised chain latch kit allows you to simply latch your gate onto any wooden or steel post. This allows you to loop your chain around your gate, rather than the fence post.

Heavy Duty Deep Drilling Screws

Our chain latch kit uses special deep-drilling metal tek screws, designed especially for screwing into thicker steel. These screws are rated for steel up to 8mm thick and will easily drill through heavy wall steel posts. The last thing you want when installing your gate latch is to have to worry about broken screws or screws that pull out easily! You won’t have that problem with this chain latch kit!

Install with only one hole to drill! An improved version of a brooker hinge. Strong, reliable & long-lasting. Hang your gate quickly and easily.

Key Features:

Are you looking for a simple screw-on gate kit? Our nylon gudgeon kit can be easily fitted with a 10mm auger.

The kit is made from hot-dip galvanised steel. This ensures a strong and long-lasting quality gate hinge set.

Key Features:

Our Drive-Tight steel fence posts allow you to hand-drive your post without needing a pneumatic driver. It drives in straighter than a round post, yet still offers the versatility of a round post. You are not restricted by 90 degrees like you are with an angle post.

If you have a machine, the Drive-Tight post drives a lot easier and quicker due to the picket base, resulting in less wear and tear on your machine.

To ensure that it is secure in the ground, we have included two lugs at a 40-degree angle that allows you to drive two half-star pickets at an angle into the ground. These three points of anchorage gives you an extra strong strainer post.

Key Features: 

Looking for some strong galvanised steel fence posts? Our DRIVE-TIGHT steel strainer posts are perfect for the job and easy to install.

Key Features:

The Bolt-On Oval Ring Latch is one of the most user-friendly latches out there. It’s designed with a smooth, easy-to-grasp knob that’s perfect for opening and closing – even on the bike. And with its stock-proof design, you can be sure that your animals won’t be able to lick their way through.

One of the best things about this latch is that its chain length is adjustable. Whether your posts are moving or you need a little extra length, you can simply place the bolt through different chain links to adjust it.

Key Features:

Looking for a durable gate kit? Our top saddle backing plate is a unique design that combines a backing plate with a saddle attachment. This combination results in an extreme strong top hinge set.It can be screwed on, or welded on, allowing you to easily fasten the top of your gate and swing it smoothly.Each piece is hot dipped galvanised to fight against corrosion. Paired with one of our bottom gudgeons and your choice of latch, it will give you an extremely strong and long lasting product.

Key Features:

Need a strong solution to secure two gates closed, or an easy-top-open bow for a single gate? Our upgraded galvanised gate bow can easily be installed onto a gate or post. Securing your gates is as simple as lifting up the bow and dropping it over the gate.

Key Features:

All of our gate kits are made from hot dipped galvanised steel to ensure strong and long lasting kit. With a 16mm thread, it can be easily installed with a 20mm Auger. 275mm – perfect for pine posts.

Key Features:

If you are looking for a more secure and stock proof alternative to your standard hook latches, then our spring hook latches are an excellent solution.

Our spring latches are slightly different from our competitors. On each latch we there is an indent in the stainless steel circle ring that has been custom designed to resist sideways movement. This ensures a secure and longer lasting latch.

Key Features:

Are you looking to fix up an existing end assembly, or want something that lasts? Our fitting kits are simple and can take 5 minutes to install.

The design of our Twist Tight Stay Connectors means you can run your end assembly at any angle. Our unique design tension cable assembly is a lot quicker to install – just drop the loop over your pine post, or slip knot it if you have the existing wire installed and run the tension cable to your footplate. No drilling of the post is required.

All components are either stainless steel or hot-dipped galvanised to ensure a long-lasting end assembly. 

Our round post driver is designed specifically for our Drive Tight posts. It is made from 120NB pipe so it can easily fit over 100NB strainers.  Weighing at 21kg, it has enough weight to help you drive the post in, but still light enough to lift.

Made from quality steel, and hot dipped galvanised, you can trust that it will last.

Are you looking for a simple, yet strong and reliable hinge? Our weld-on hinges are perfect for any steel gate.

Key Features:

• Strong
• Galvanised
• Fast Install
• Easy Install
• Weld On

Make installing post and rail fencing a breeze on steel or timber posts with our RailTight End Brackets. Sold as a pair.

Our two way latches are made from zinc plated steel. These lightweight latches allow you to swing a gate closed from either side. When the gate hits the bevelled lug, it pushes the lug up allowing the gate to slide in. Once the gate is in, the lug will drop back down, holding the gate in place. 

We don’t recommend them for stockyards, however, they are excellent if you need a secure latch for personal access and residential gates.

Key Features:

• Easy to Install
• Weld On
• Screw On
• Corrosion Resistant

The strongest adjustable bolt-on hinge set on the market. Built for round steel posts, installed with one tool, and designed so your gate never drags in the dirt again. Patent-protected Australian design.

The FG6 can be installed in minutes with no welding, no drilling, and no power tools. All you need is a 19mm socket or spanner. That makes it the only hinge set you can fit during total fire bans, in remote locations, or anywhere a welder isn’t practical.

If security is a concern, this is the hinge set for you. Once this hinge is welded onto the post, the gate isn’t going anywhere. For a very affordable price, you get a simple, versatile, and robust hinge set. Peace of mind doesn’t need to come at a premium.

Our zinc plated gate kit allows you to install and lock up your gate using a minimal amount of pieces. The gate kit includes:

• A weld on steel pin.
• A weld on saddle. 

Our post caps stop water and spiders from getting into your posts. Just put them on top of your post and hammer them on with a rubber mallet. It’s that simple.

Each galvabond round post cap is made from quality steel to ensure a long lasting and strong cap.

Each cap has little ridges on the inside, which means once the cap is on, it wont come off.

A medium tensile electric fence wire developed specifically for permanent electric fencing.

• Designed for greater electric current capability a strong, flexibile wire with a consistent diameter and breaking strain.
• Better payout from the roll with no tangles or kinks.
• Relatively easy to handle and tie-off around end insulators.
• Useful in a range of situations such as cattle subdivision, strip grazing and enhancing existing fences.

Diameter: 2.50mm
Coil Length: 1000m

A general purpose, 2.50mm medium tensile, economical fencing wire.

• Large 1,500m coils to reduce construction downtime.
• Good strength and flexibility.
• Use in low to medium pressure situations.
• Also suited to electric fencing as it has good tying properties.

Diameter: 2.50mm
Coil Length:1500m

An economical, general purpose, high tension wire with good flexibility.

• Greater strength than Flexabel^® whilst retaining reasonable tying properties.
• Large coil size helps to reduce construction downtime.
• Due to its strength, suited to plain and barbed wire suspension fencing.
• Use in medium to high pressure situations.

Diameter: 2.50mm
Coil Length:1,500m