Onga’s jet-assisted Homemaster pumps are designed for households where reliability, efficiency and ease of installation are important. The JM Series is an economical household pressure system incorporating the high performance and reliability features typical of Onga. The suction inlet is high on the pump body, enhancing self-priming and air handling ability, while the totally enclosed fan-cooled motor gives years of quiet and reliable operation.
Applications:
Domestic pressure system (with presscontrol), water transfer, irrigation and garden supply
Sort by:
The MiniBlaze Single Impeller Petrol Pump is perfect in situations where there is isolation from electricity preventing electric powered pumps being used. Horizontal, single-stage, surface mounted centrifugal pump with closed impeller for pumping debris-free water coupled to a reliable 2.5HP (152F) engine.
Applications
The versatility of the MiniBlaze is endless, from fighting ember attacks to use as a tool for the handyman, stock watering, ute pack and spray units, as well as evacuating water from work sites. Suitable for pumping clean non-aggressive liquids without solids or fibres in suspension.
Onga has a vast range of fire fighting pumps to accommodate your requirements. The twin stage fire fighting pump provides higher pressure, allowing you to fight fires from a safer distance. Often getting power to a site near a bore, creek, river or dam is difficult or even impossible.
Applications
Firefighting, tank filling, water transfer, boom spraying and irrigation.
Multi Evo is a self-priming horizontal multi-stage centrifugal pump. The innovative, high-efficiency hydraulic system is coupled to our latest generation motor. Available in various models and all are certified for use with drinking water - AS/NZ 4020.
Applications
Domestic pressure system (with Presscontrol or pressure switch kit), water transfer, irrigation and garden water supply.
IWaterSwitch encompasses new intelligent features and a contemporary design resulting in a highly dependable rainwater harvesting unit that recreates the industry benchmark. The iWaterSwitch is a fully automatic device that is designed to seamlessly switch between stored rainwater and mains water supply when required to supply toilets, laundry, garden and other non-potable water applications. The all new iWaterSwitch displays real time flow rate, pressure and current readings as well as recording rainwater used so that you can track your savings.
Applications: Use your rainwater for the washing machine, flushing the toilet, washing the car, watering the garden.
Onga’s jet-assisted JS Series pumps are designed for households where reliability, efficiency and ease of installation are important. There is a model to suit almost every situation. These Australian assembled pumps are mounted on a stable, moulded base for protection from corrosion and have totally enclosed fan-cooled motors.
Key Features:
- Stainless steel casing provides strength and superior protection against corrosion and the elements
- Precision moulded internals for high performance and durability
- Coupled with a Presscontrol or pressure switch kit becomes reliable automatic pressure system
- Loss of prime protection when coupled with Presscontrol
- Excellent self-priming capabilities
- Inbuilt thermal overload
- Suction lift to 7.6 m
Onga’s jet-assisted JS Series pumps are designed for households where reliability, efficiency and ease of installation are important. There is a model to suit almost every situation. These Australian assembled pumps are mounted on a stable, moulded base for protection from corrosion and have totally enclosed fan-cooled motors.
Key Features:
-
Stainless steel casing provides strength and superior protection against corrosion and the elements
-
Precision moulded internals for high performance and durability
-
Coupled with an Onga Press Control becomes reliable automatic pressure system
-
Excellent self-priming capabilities
-
Inbuilt thermal overload
-
Suction lift to 7.6 m
U3 KS Special model is made from high-quality chemical resistant material. Enabling it to handle aggressive media such as liquids containing salt, brackish water, condensate, silage liquor, liquid fertilizers and water of high temperatures (to 60°C intermittently). On top of the aforementioned the U3KS Special pump provides all of the outstanding innovative technical features as the U3KS.
Able to handle aggressive media such as liquids containing salt, brackish water, condensate, silage liquor, whey and liquid fertiliser*, contaminated water at high temperatures (to 60°C intermittently) ie. from dishwashers and washing machines, domestic waste water (without faecal matter), rainwater and lightly polluted water.
Key Features
-
Saline solutions up to 10% salinity
-
SiC mechanical seal
-
Continuous operation
-
Low level pumping
-
Flushing device
-
Moisture sealed cable inlet
-
Built in level control
-
Max. head - 7 m
- Max. flow - 105 lpm
U5KS model can be used for dealing with dirty water from garden ponds, floodwater or swimming pools. Thanks to its shallow, built-in suction system, it can reduce residual water level to no more than a few millimetres! The U5KS is an extremely powerful and versatile centrifugal submersible pump suitable for faecal-free wastewater with solids up to 10mm particle size. Thanks to the removal strainer base, it is possible to increase the free passage to 20mm.
Domestic waste water (without faecal matter) such as from washing machines and dishwashers, Rainwater, drainage; including flooded cellars and dirty water from sources such as garden ponds and lightly polluted water
Key Features
-
10/20mm free passage (when removable strainer has been detached)
-
Continuous operation
-
Low level pumping
-
Flushing device
-
Moisture sealed cable inlet
-
Built in level control
-
Max. head - 8 m
- Max. flow - 190 lpm
U6KS model is suitable for lift wells, garden fountains, greenhouses, basements, pump wells and reservoirs. It's unique silicon carbide mechanical seal make it suitable not only for conveying drainage and waste water but also for liquid fertiliser. The U6KS also includes an integrated motor contact switch which turns the pump off if it overheats. Operational safety and a long service life are prime features of this pump.
Applications
Drainage of non-contaminated water and mildly contaminated (faecal free) waste and ground water including silage liquor and liquid manure, rainwater and domestic waste water such as from washing machines and dishwashers.
Key Features
-
10/20mm free passage (20mm free passage when removable strainer has been detached)
-
SiC mechanical seal
-
Continuous operation
-
Low level pumping
-
Flushing device
-
Moisture sealed cable inlet
-
Built in level control
-
Max. head - 9 m
- Max. flow - 250 lpm
The Onga LTP1100 suits large sized pools up to 55,000 litres.
Benefits:
The range of Leisure Time pool pumps have been purposefully designed to provide maximum performance and corrosion resistance at a realistic cost.
Features:
• Electrical approvals - Leisuretime pool pumps have passed all stringent Australian Standards for safety and is approved for installation within the wetted zone of the pool area.
• Elevated motor foot - Incorporating an elevated mount into the pump design keeps moisture well away from the motor.
• Double coated endshield - Unique double zinc plated cast iron endshield for better corrosion protection extending the life of the pump.
• Large hair & lint pot - Easy to clean large hair & lint pot with a clear lid so you can check at a glance whether it is full or not.
• Low friction lint pot O-ring - Having a low friction O-ring on the lint pot means you only need to tighten the lid by hand.
• Self-aligning barrel unions - Onga's unique 5 degree self-aligning barrel unions make pipework connection a breeze.
The Onga LTP550 suits small and medium sized pools up to 30,000 litres.
Benefits:
The range of Leisure Time pool pumps have been purposefully designed to provide maximum performance and corrosion resistance at a realistic cost.
Features:
• Electrical approvals - Leisuretime pool pumps have passed all stringent Australian Standards for safety and is approved for installation within the wetted zone of the pool area.
• Elevated motor foot - Incorporating an elevated mount into the pump design keeps moisture well away from the motor.
• Double coated endshield - Unique double zinc plated cast iron endshield for better corrosion protection extending the life of the pump.
• Large hair & lint pot - Easy to clean large hair & lint pot with a clear lid so you can check at a glance whether it is full or not.
• Low friction lint pot O-ring - Having a low friction O-ring on the lint pot means you only need to tighten the lid by hand.
• Self-aligning barrel unions - Onga's unique 5 degree self-aligning barrel unions make pipework connection a breeze.
The Onga LTP750 suits large sized pools up to 50,000 litres.
Benefits:
The range of Leisure Time pool pumps have been purposefully designed to provide maximum performance and corrosion resistance at a realistic cost.
Features:
• Electrical approvals - Leisuretime pool pumps have passed all stringent Australian Standards for safety and is approved for installation within the wetted zone of the pool area.
• Elevated motor foot - Incorporating an elevated mount into the pump design keeps moisture well away from the motor.
• Double coated endshield - Unique double zinc plated cast iron endshield for better corrosion protection extending the life of the pump.
• Large hair & lint pot - Easy to clean large hair & lint pot with a clear lid so you can check at a glance whether it is full or not.
• Low friction lint pot O-ring - Having a low friction O-ring on the lint pot means you only need to tighten the lid by hand.
• Self-aligning barrel unions - Onga's unique 5 degree self-aligning barrel unions make pipework connection a breeze.
The MultiDrain UV3 is a versatile drainage pump with stainless steel casing and a vertical discharge, making this an ideal grey water pump for portable applications. The UV3 has an easy-to-activate flushing device that pumps rainwater, domestic grey water and lighty polluted wastewater. Casing made of stainless steel for longer lasting performance. Motor cooling jacket ensures submerged operation without the risk of overheating. When the strainer base is removed, it can suction out residual water down to a level of 5 mm.
Well-suited for mobile use and ideal for narrow pits.
Key Features:
-
High quality stainless steel design
-
Cooling jacket for motor housing
-
Free passage 10 mm
-
Vertical discharge branch 1 1/4”
-
Moisture sealed cable inlet
-
Fluid temperature 35 °C, temporarily 70 °C (10 min.)
Onga Pantera pool pumps have been specifically designed to incorporate features that will provide reliable and efficient pump operation.
Pantera pumps are durable, high performance, corrosion resistant pumps with five levels of motor protection.
The new technology wet end design integrates a unique moulded end-shield cover and lip seal protecting the motor from water damage making this range ideal for in-ground or above ground pools.
Features:
- Stainless steel motor shaft - A 5/8" 316 Stainless Steel shaft extends the life of the pump.
- Shaft Sleeve - A nylon shaft sleeve incorporating aflinger, adds additional water ingress protection.
- Mechanical Seal - A heavy-duty 3/4" 316 Stainless Steel mechanical seal (on all models) provides extended life and longer intervals between servicing.
- Plastic Yoke and Lip-Seal - The wet end design integrates a moulded end-shield cover and lip seal,protecting the motor from water damage.
- Self aligning barrel unions (40mm/50mm) included.
- 3 years limited warranty.
Benefits:
- 5 levels of corrosion resistance
- Elevated mount keeps moisture away from the motor
- Extended life of the pump shaft because of corrosion resistant stainless steel
- Additional water ingress protection
- Stainless steel mechanical seal provides longer life and longer intervals between servicing
- Plastic Yoke and Lip-Seal protects from water damage
- Larger lint pot with clear lid makes cleaning faster and easier
- Easy pipe work connection with self aligning barrel unions
Onga Pantera pool pumps have been specifically designed to incorporate features that will provide reliable and efficient pump operation.
Pantera pumps are durable, high performance, corrosion resistant pumps with five levels of motor protection.
The new technology wet end design integrates a unique moulded end-shield cover and lip seal protecting the motor from water damage making this range ideal for in-ground or above ground pools.
Features:
- Stainless steel motor shaft - A 5/8" 316 Stainless Steel shaft extends the life of the pump.
- Shaft Sleeve - A nylon shaft sleeve incorporating aflinger, adds additional water ingress protection.
- Mechanical Seal - A heavy-duty 3/4" 316 Stainless Steel mechanical seal (on all models) provides extended life and longer intervals between servicing.
- Plastic Yoke and Lip-Seal - The wet end design integrates a moulded end-shield cover and lip seal,protecting the motor from water damage.
- Self aligning barrel unions (40mm/50mm) included.
- 3 years limited warranty.
Benefits:
- 5 levels of corrosion resistance
- Elevated mount keeps moisture away from the motor
- Extended life of the pump shaft because of corrosion resistant stainless steel
- Additional water ingress protection
- Stainless steel mechanical seal provides longer life and longer intervals between servicing
- Plastic Yoke and Lip-Seal protects from water damage
- Larger lint pot with clear lid makes cleaning faster and easier
- Easy pipe work connection with self aligning barrel unions
Onga Pantera pool pumps have been specifically designed to incorporate features that will provide reliable and efficient pump operation.
Pantera pumps are durable, high performance, corrosion resistant pumps with five levels of motor protection.
The new technology wet end design integrates a unique moulded end-shield cover and lip seal protecting the motor from water damage making this range ideal for in-ground or above ground pools.
Features:
- Stainless steel motor shaft - A 5/8" 316 Stainless Steel shaft extends the life of the pump.
- Shaft Sleeve - A nylon shaft sleeve incorporating aflinger, adds additional water ingress protection.
- Mechanical Seal - A heavy-duty 3/4" 316 Stainless Steel mechanical seal (on all models) provides extended life and longer intervals between servicing.
- Plastic Yoke and Lip-Seal - The wet end design integrates a moulded end-shield cover and lip seal,protecting the motor from water damage.
- Self aligning barrel unions (40mm/50mm) included.
- 3 years limited warranty.
Benefits:
- 5 levels of corrosion resistance
- Elevated mount keeps moisture away from the motor
- Extended life of the pump shaft because of corrosion resistant stainless steel
- Additional water ingress protection
- Stainless steel mechanical seal provides longer life and longer intervals between servicing
- Plastic Yoke and Lip-Seal protects from water damage
- Larger lint pot with clear lid makes cleaning faster and easier
- Easy pipe work connection with self aligning barrel unions
Onga Pantera pool pumps have been specifically designed to incorporate features that will provide reliable and efficient pump operation.
Pantera pumps are durable, high performance, corrosion resistant pumps with five levels of motor protection.
The new technology wet end design integrates a unique moulded end-shield cover and lip seal protecting the motor from water damage making this range ideal for in-ground or above ground pools.
Features:
- Stainless steel motor shaft - A 5/8" 316 Stainless Steel shaft extends the life of the pump.
- Shaft Sleeve - A nylon shaft sleeve incorporating aflinger, adds additional water ingress protection.
- Mechanical Seal - A heavy-duty 3/4" 316 Stainless Steel mechanical seal (on all models) provides extended life and longer intervals between servicing.
- Plastic Yoke and Lip-Seal - The wet end design integrates a moulded end-shield cover and lip seal,protecting the motor from water damage.
- Self aligning barrel unions (40mm/50mm) included.
- 3 years limited warranty.
Benefits:
- 5 levels of corrosion resistance
- Elevated mount keeps moisture away from the motor
- Extended life of the pump shaft because of corrosion resistant stainless steel
- Additional water ingress protection
- Stainless steel mechanical seal provides longer life and longer intervals between servicing
- Plastic Yoke and Lip-Seal protects from water damage
- Larger lint pot with clear lid makes cleaning faster and easier
- Easy pipe work connection with self aligning barrel unions